In 2012, Fujian Will Eliminate An Annual Output Of 100 Thousand Under The Label Of Leather Factory.

18, Fujian Province environmental protection Hall issued the total amount of major pollutants in 2011 according to the provincial government Emission reduction According to the work request, the existing scale of production of 30 thousand scale sheets / year to 100 thousand mark / year leather enterprises will only be allowed to process wet blue and two layers of leather before the end of this year. From next January 1st, the scale of production will be 100 thousand mark per year or less. Leatherwear Enterprises will be closed down and eliminated. Right before the end of last year. eliminate The 30 thousand mark / year leather enterprises and the closed polluting leather enterprises must be strictly supervised and shut down. At the same time, Fujian, as well as key polluting industries such as paper making, textile printing and dyeing, will also be phased out. Pollution control for wastewater that has not been carried out and can not be discharged steadily. enterprise It is imperative that the deadline for rectification should be ordered, and that the rectification task is not completed within the prescribed time limit.

According to emission reduction advice, industrial enterprises must improve technology and improve wastewater reuse rate. Before the end of this year, the chrome containing wastewater and sulfide containing waste water in the leather industry will be reused. The comprehensive wastewater should be treated by membrane treatment to regenerate industrial water. The papermaking industry will further improve the water reuse rate on the basis of strictly implementing the discharge capacity of the tonnes of products produced by the national standard. The waste water discharged from the paper making enterprises with waste paper as the raw material will be less than 10 tons before the end of next year, of which the average volume of waste water discharged from the general packaging paper and paperboard tons should be below 5 tons. The printing and dyeing industry should adopt new technologies, new equipment and new technologies to increase water reuse. By the end of 2013, the volume of wastewater from unit production will be reduced by about 50%, and the water reuse rate will reach 50%.